| ACCELER TOPTURN MACHINE SPECIFICATIONS | |||
| Model | Acceler Topturn 1520 | Acceler Topturn 2020 | |
| Travel | |||
| X * Y * Z Axis | mm | 1520*700*700 | 2020*1000*800 |
| Spindle End to Table | mm |
100-800 |
100-900 |
| Spindle Center to Column | mm |
720 |
1050 |
| Horizontal Spindle Center to Table | mm |
376-1076 |
376-1176 |
| Table | |||
| Table Size ( Rotary table dia) | mm |
1600*700 (630) |
2200*1000 (1000) |
| T-Slot | mm |
18*6*100 |
22*7*150 |
| Rotary table Max. Table Load | Kgs |
800 |
3000 |
| Table Height | mm |
1000 |
1180 |
| Feed Rate | |||
| Rapid Traverse (X , Y Axis) | mm/min |
16,000 |
16,000 |
| Rapid Traverse (Z Axis) | mm/min |
16,000 |
16,000 |
| Cutting Feed Rate | mm/min |
16,000 |
16,000 |
| Spindle | |||
| Spindle Nose Taper | ISO |
NBT 40 (NBT50) |
NBT 40 (NBT50) |
| Transmission |
Built In |
Built In |
|
| Bearing Lubrication |
Grease |
Grease |
|
| Spindle Speed | RPM |
12000 (8000) |
12000 (8000) |
| Motors | |||
| Spindle Motor | KW |
26 |
26 |
| Servo Motor (X * Y * Z) | KW |
5.3*5.3*5.3 |
7*7*5.3 |
| ATC | |||
| ATC Type BT40 |
Arm |
Arm |
|
| Tool Storage Capacity |
24 (30) |
24 (30) |
|
| Max. Tool Dia. / w/o Adjecent | mm |
80 |
80 |
| Max. Tool Weight | Kgs |
8 |
8 |
| Max. Tool Length | mm |
300 |
300 |
| Machine Accuracy | |||
| Positioning Accuracy | mm |
±0.005 /1000 |
±0.005 /1000 |
| Repeatability Accuracy | mm |
±0.003 /1000 |
±0.003 /1000 |
| 4th axis and 5th axis Accuracy | |||
| B Axis Positioning/Repeatability (with scale) | sec. |
15/4 (10/4) |
15/4 (10/4) |
| C Axis Positioning/Repeatability (with scale) | sec. |
15/4 (10/4) |
15/4 (10/4) |
| Compressed Air Supply | Kg/c㎡ |
7 |
7 |
| Power Requirement | KVA |
40 |
55 KVA |
| Machine Size (L*W*H ) | mm | 3600*2900*2650 | 5860*4100*3200 |
| Machine Weight | Kgs |
12,000 |
22,000 |
| STANDARD ACCESSORIES | Tool kit Box and Tools | ||
| Spindle Air Seal | |||
| Four Screw type Chip Conveyors at Y axis | |||
| Hand held MPG | |||
| Heidenhain iTNC 530 controller | |||
| OPTIONAL ACCESSORIES | CTS | ||
| Blum tool measurement | |||
| Siemens and Fanuc Controllers | |||
| *Specifications and design are subject to change without notice. | |||
| *( ) means option | |||