MODEL NO: 2600/ 3200/ 4200/ 5200/ 6000/ 3232/ 4232/ 5232/ 6032

craftsman

 

Most Double column machines can do heavy cutting on large work piece, but when it comes to a high accuracy finish contour cutting that requires very few spindle vibration and faster axes response, the common double column machines have much room to be improved. With new concept of high speed cutting like head without counter weight, direct drive spindle and superb rigidity machine structure, the Craftsman can cut all the way from rough to high accuracy finish in one machine.

 

SWIFT

  • 20m rapid feed rate at Y and Z axes.
  • Head with counter weight .
  • Robust Direct Drive Spindle.
  • Direct drive at three axes.

Rigid

  • Double wall sand casting.
  • Head surrounded by four heavy duty linear rollers(patent) .
  • Three heavy duty linear rollers on Y axis.
  • Four heavy duty linear rollers on X axis.
  • Direct Drive Spindle with large ceramic bearings.
NEW CRAFTSMAN DOUBLE COLUMN MACHINE SPECIFICATIONS
Model Craftsman  2600 Craftsman  3200 Craftsman  4200 Craftsman  5200  Craftsman   6000
Travel
X * Y * Z Axis mm 2600*2500*800 3200*2500*800 4200*2500*800 5200*2500*800 6000*2500*800
Spindle End to Table mm 200-1000 200-1000 200-1000 200-1000 200-1000
Distance between Columns mm 2800 2800 2800 2800 2800
Linear Ways  Width X,Y,Z  mm 55*55*45 55*55*45 55*55*45 55*55*45 55*55*45
Ball Screw Dia  X,Y,Z   mm Axis 63*63*50 63*63*50 63*63*50 80*63*50 80*63*50
Table
Table Size (X*Y) mm 2800*2500 3400*2500 4400*2500 5400*2500 6000*2500
T-Slot  (wide*no*distance) mm 18*11*200 18*11*200 18*11*200 18*11*200 18*11*200
Max. Table Load Kgs 12,000 15,000 16,000 17,000 18,000
Table Height mm 930 930 930 930 930
Feed Rate
Rapid Traverse Rate (X/ Y Axis) mm/min 16/20 12/20 10/20 8/20 7/20
Rapid Traverse Rate  (Z Axis) mm/min 20 20 20 20 20
Cutting Feed Rate mm/min 16 12 10 8 7
Spindle
Spindle Nose Taper ISO NBT50 NBT50 NBT50 NBT50 NBT50
Transmission Direct Drive Direct Drive Direct Drive Direct Drive Direct Drive
Bearing Lubrication Grease Grease Grease Grease Grease
Spindle Speed RPM 6000 (10000) 6000 (10000) 6000 (10000) 6000 (10000) 6000 (10000)
Motors
Spindle Motor KW 26/30 26/30 26/30 26/30 26/30
Axes Servo Motor  XYZ KW 9*8*8 9*8*8 9*8*8 9*8*8 9*8*8
ATC
ATC Type  NBT50 (SK 50)
Tool Storage Capacity 24(32,40,60) 24(32,40,60) 24(32,40,60) 24(32,40,60) 24(32,40,60)
Max. Tool Diameter mm 110 110 110 110 110
Max. Tool Weight Kgs 20 20 20 20 20
Max. Tool Length mm 350 350 350 350 350
Machine Accuracy
Positioning  Accuracy mm ±0.005 /1000 ±0.005 /1000 ±0.005 /1000 ±0.005 /1000 ±0.005 /1000
Repeatability Accuracy mm ±0.003/1000 ±0.003/1000 ±0.003/1000 ±0.003/1000 ±0.003/1000
Others
Air Requirement KG/c㎡ 7 7 7 7 7
Power rquirement KVA 60 60 60 60 60
Machine Size (L *W* H ) mm 8000*4900*4420 9000*4900*4420 11000*4900*4420 13200*4900*4420 16200*4900*4420
Machine Weight Kgs 30,000 32,000 40,000 45,000 50,000
Packing 2*40′ HQ 2*40′ HQ 2*40′ HQ 3*40′ HQ 3*40′ HQ
STANDARD ACCESSORIES Tool kit Box and Tools /  Ethernet  /  CF card 1GB / Hand held MPG
Fanuc 0i MC controller
OPTIONAL ACCESSORIES Two Axes Rotary Table   /  Special  Head  /  Renishaw TS 27R , NC4, MP60/CTS
Z axis travel 1000 mm
Power Failure Safety Module
Siemens and Heidenhain Controllers
*Specifications and design are subject to change without notice.
LARGE CRAFTSMAN DOUBLE COLUMN MACHINE SPECIFICATIONS
Model Craftsman  3232 Craftsman  4232 Craftsman  5232  Craftsman   6032
Travel
X * Y * Z Axis mm 3200*3800*1000 4200*3800*1000 5200*3800*1000 6000*3800*1000
Spindle End to Table mm 200-1200 200-1200 200-1200 200-1200
Distance between Columns mm 3200 3200 3200 3200
Linear Ways  Width X,Y,Z  mm 55*55*45 55*55*45 55*55*45 55*55*45
Ball Screw Dia  X,Y,Z   Axes mm 80*63*63 80*63*63 80*63*63 80*63*63
Ball Screw Pitch  X,Y,Z  Axes mm 12*12*12 12*12*12 12*12*12 12*12*12
Table
Table Size (X*Y) mm 3400*2600 4400*2600 5400*2600 6200*2600
T-Slot  (wide*no*distance) mm 28*15*180 28*15*180 28*15*180 28*15*180
Max. Table Load Kgs 14,000 16,000 18,000 20,000
Table Height mm 930 930 930 930
Feed Rate
Rapid Traverse Rate (X/ Y Axis) mm/min 12/16 10/16 8/16 7/16
Rapid Traverse Rate  (Z Axis) mm/min 20 20 20 20
Cutting Feed Rate mm/min 12 10 8 7
Spindle
Spindle Nose Taper ISO NBT50 NBT50 NBT50 NBT50
Transmission Direct Drive Direct Drive Direct Drive Direct Drive
Bearing Lubrication Grease Grease Grease Grease
Spindle Speed RPM 6000 (10000) 6000 (10000) 6000 (10000) 6000 (10000)
Motors
Spindle Motor KW 26/30 26/30 26/30 26/30
Axes Servo Motor  XYZ KW 9*8*8 9*8*8 9*8*8 9*8*8
ATC
ATC Type  NBT50 (SK 50)
Tool Storage Capacity 30 (48,60,80) 30 (48,60,80) 30 (48,60,80) 30 (48,60,80)
Max. Tool Diameter/w/o Adjecent mm 125/225 125/225 125/225 125/225
Max. Tool Weight Kgs 20 20 20 20
Max. Tool Length mm 350 350 350 350
Machine Accuracy
Positioning  Accuracy mm ±0.005 /1000 ±0.005 /1000 ±0.005 /1000 ±0.005 /1000
Repeatability Accuracy mm ±0.003/1000 ±0.003/1000 ±0.003/1000 ±0.003/1000
Others
Air Requirement KG/c㎡ 7 7 7 7
Power rquirement KVA 60 60 60 60
Machine Size (L *W* H ) mm 9000*4900*4420 11000*4900*4420 13200*4900*4420 16200*4900*4420
Machine Weight Kgs 38,000 42,000 46,000 50,000
Packing 3*40′ HQ 3*40′ HQ 4*40′ HQ 4*40′ HQ
STANDARD ACCESSORIES Tool kit Box and Tools /  Ethernet  /  CF card 1GB / Hand held MPG
Fanuc 0i MD controller
OPTIONAL ACCESSORIES Two Axes Rotary Table   /  Special  Head
Z axis travel 1200 mm
Power Failure Safety Module
Siemens and Heidenhain Controllers
*Specifications and design are subject to change without notice.