Chuck size |
|
Swing over bed |
37.4″ |
Swing over carriage |
24.8″ |
Center distance |
59.06″-393.7″ |
Loading cap. Bet. Center (kg) |
3000 (6600 lbs) |
Main motor |
- 25/20 HP
|
Spindle speed |
2 Group 12-900 rpm |
Spindle bore |
3.35″ |
Front bearing diameter |
|
Tailstock taper |
MT No. 6 |
Rapid feed speed |
X=59 Z=118 |
Type of turret |
H4 |
Machine weight (kg) |
- 5700 (12540 lbs) – 10800 (23760 lbs)
|
|
Chuck size |
|
Swing over bed |
37.4″ |
Swing over carriage |
24.8″ |
Center distance |
59.06″-393.7″ |
Loading cap. Bet. Center (kg) |
3000 (6600 lbs) |
Main motor |
- 25/20 HP
|
Spindle speed |
2 Group 12-900 rpm |
Spindle bore |
4.92″ |
Front bearing diameter |
|
Tailstock taper |
MT No. 6 |
Rapid feed speed |
X=59 Z=118 |
Type of turret |
H4 |
Machine weight (kg) |
- 5700 (12540 lbs) – 10800 (23760 lbs)
|
|
- DL95 and DL120 bed widths are 565mm and 635mm respectively. Beds are induction-hardened (Hs67-74) deeply and ground precisely to ensure a long life.
- Low-speed with high torque driving can be performed with 2-step gear change in headstock.
- The tailstock and it’s spindle are rigidly designed for heavy-duty jobs. Maximum load capacity is 3000 kgs with an MT No. 6 center.
- The machine control funtion is basic and allows for 2-axis operation. Operation is easy using a variety of menus.
|
- DL95 and DL120 bed widths are 565mm and 635mm respectively. Beds are induction-hardened (Hs67-74) deeply and ground precisely to ensure a long life.
- Low-speed with high torque driving can be performed with 2-step gear change in headstock.
- The tailstock and it’s spindle are rigidly designed for heavy-duty jobs. Maximum load capacity is 3000 kgs with an MT No. 6 center.
- The machine control funtion is basic and allows for 2-axis operation. Operation is easy using a variety of menus.
|